While traditionally the timing belt has been preferred to a timing chain, manufacturers have made the switch to using timing chains in the past few years. It’s a more reliable solution which lasts longer, and although it can be a little more expensive upfront, it will be the cheaper and more reliable option over time.

Replacing the timing chain is a complicated job, and the labor costs can be quite high. For most cars, a timing chain replacement costs between $ 413 and $ 1040 , or you can order the parts themselves for $ 88 and $ 245. It is a tricky repair though, so unless you’re particularly skilled it’s usually best left to a mechanic.

Timing Chain Replacement Cost Comparison

Below are some sample costs for having the timing chain replaced at some of the leading garage chains in the country. Prices will vary from state to state and from car to car, but they should give you a rough idea of what you can expect to pay.

Your Mechanic

Work Warranty Price
Parts & labor 12 months $ 437 – $ 783

Midas

Work Warranty Price
Parts & labor 12 months $ 416 – $ 941

Mr. Tire

Work Warranty Price
Parts & labor 12 months $ 440 – $ 895

Pep Boys

Work Warranty Price
Parts & labor 6 Months $ 422 – $ 1040

What Is the Timing Chain?

The timing chain works as the connection between the camshaft and the crankshaft, and the main responsibility of the chain is to operate the inlet and exhaust valve gear during the stroke cycle of the piston. The chain keeps these valves opening and closing at specific intervals, helping the engine to function properly.

Until recently, the vast majority of cars were built to use a timing belt instead of a timing chain. Using a timing belt was usually more cost effective than using a timing chain, with the only cars opting for the chain being higher-end sports cars.




You are watching: 1999 pontiac grand am timing chain replacement

Recently this trend has actually been in the opposite direction, with the timing chain taking over as the preferred option. A timing chain will need replaced far less frequently than a timing belt, resulting in a lower cost to maintain your 1999 Pontiac Grand Am 2-dr for the owner.

Benefits of Timing Chain Replacement

While a timing chain will usually last far longer than a timing belt, it will suffer from wear and tear and will need replaced at some point during the life cycle of your 1999 Pontiac Grand Am 2-dr.

Faulty timing belts can cause some serious damage to the engine if they’re not repaired, and in some cases it can completely disable your 1999 Pontiac Grand Am 2-dr. Manufacturers were being increasingly blamed for these problems, which has led many to make the switch from belt to chain. As a result, car owners need to more aware of what the timing chain is, how to spot a potential problem with it and how often it should be inspected and replaced.

One of the main problems with the timing belt is that they weren’t being changed as often as they should be. Replacing a timing belt is a fairly costly repair, so many people would simply sell or trade in their car instead of having it repaired. In many cases this would result in someone else buying your 1999 Pontiac Grand Am 2-dr and not being aware of the timing belt problem until it was too late.

The use of a timing chain helps reduce the likelihood of this happening as it’s designed to last much longer than the belt, so unless you’re buying a much older 1999 Pontiac Grand Am 2-dr there should be less risk of major repairs in the future.

When Should You Have Timing Chain Replaced?

There are usually a few signs that the timing chain on your 1999 Pontiac Grand Am 2-dr should be replaced, some more subtle than others. Poor fuel economy and occasional misfires could be caused by a timing chain issue, as could difficulty starting your 1999 Pontiac Grand Am 2-dr or the engine making a rattling sound regularly.


If you notice any unusual sounds from the engine or anything out of the ordinary then you should take your 1999 Pontiac Grand Am 2-dr to your mechanic. They’ll be able to diagnose the issue and if it’s a problem with the timing chain it’s best to have the replacement done fairly quickly.

While timing belt replacement can be expensive, the damage caused by a faulty chain will be much more expensive to fix so it’s best to tackle the problem early. By taking the financial hit early you can avoid major engine damage which can cost thousands of dollars to repair.

What Is Done During Timing Chain Replacement?

Replacing the timing chain is a big job which will likely require multiple parts of the engine being disassembles and reconstructed Before the main work starts the engine will be cleaned thoroughly with de-greaser The mechanic will determine the firing order of the vehicle They will ensure that the number 1 cylinder is up by removing the spark plug and placing a screwdriver in the spark plug hole, with the piston near the top of the screwdriver The battery cables will be disconnected and the radiator cap will be rerelocated The coolant will be drained from the engine The mechanic will then remove the radiator hoses, remove all drive belts, remove the heater hoses, remove the water pump and fan and finally the timing chain cover There will be a mark or a dot on both the old chain and the tooth of the chain gear. The engine will be rotated until these marks are to adjust The mechanic will scratch a new reference mark across the chain and the gear with a screwdriver, before loosening the tension gear and removing the chain The gear will be lubricated prior to the new chain being set up The new timing chain will be placed onto the gears, ensuring the marks align effectively The camshaft sprocket bolts will be reset up They will then use a hammer and punch to drive out the crankshaft seatogether The new crankshaft seal will be tapped into the timing cover and the seal will be covered with oitogether The mechanic will then start replacing the timing chain cover, reinstalling the fuel and water pumps and the fan The radiator will be filled with coolant and the various belts and hoses will be reassociated The battery will be reconnected and the engine began

How to Save Money on Timing Chain Replacement

Replacing the timing chain is something which should be carried out by a qualified professional rather than a repair you attempt at home. It’s a complex and time-intensive repair, and getting it wrong could cause some pretty serious and expensive damage to your 1999 Pontiac Grand Am 2-dr.

The best way of saving money on timing chain replacement is to have the work done early before it causes any further damage to your engine. The cost of the replacement can be high, but it’s a mere fraction of what you’d have to pay if it started causing problems with other parts of the engine.

Get a few quotes from garages in your area to see what you can expect to pay, and go with the place that offers a fair price and which has a good reputation. Quality work is every bit as important as saving money on your auto repair , so go with someone good who won’t rip you off.

Sample Timing Chain Replacement Costs

Below are some example costs for replacing the timing chain on some of the most popular models in the country.

See more: What Are The Multiples Of 9, Least Common Multiples (Lcms)

These prices should be used as a guide only, as every garage will have their own pricing structure.

Model Labor Parts Total
Ford F-Series $ 499 – $ 614 $ 114 – $ 167 $ 613 – $ 781
Chevrolet Silverado $ 484 – $ 741 $ 137 – $ 199 $ 621 – $ 940
Ford Focus $ 319 – $ 550 $ 97 – $ 145 $ 416 – $ 695
Toyota Camry $ 389 – $ 650 $ 161 – $ 245 $ 550 – $ 895
Toyota Corolla $ 415 – $ 766 $ 144 – $ 231 $ 559 – $ 997
Nissan Altima $ 334 – $ 708 $ 88 – $ 171 $ 422 – $ 879
Honda CR-V $ 289 – $ 674 $ 124 – $ 205 $ 413 – $ 879
Honda Civic $ 315 – $ 667 $ 145 – $ 224 $ 460 – $ 891
Honda Accord $ 347 – $ 587 $ 110 – $ 201 $ 457 – $ 788
Ford Fusion $ 299 – $ 419 $ 121 – $ 189 $ 420 – $ 608