If that is much easier to walk increase a hill 보다 to journey up, you may have actually a negative fuel filter. Check out on come learn how to change the fuel filter on her Honda Accord.
This article uses to the Honda Accord (1990-2002).
You are watching: 2000 honda accord lx fuel filter location
For Honda owners who don"t perform consistent maintenance, among the items that ultimately needs come be changed is the fuel filter. Yet it"s no as negative as the sounds. If you are overdue for this task, girlfriend may notification that under tougher and also steeper road problems your Accord could feel sluggish. A professional can execute this job pretty quickly, but at a price. It may take girlfriend a little longer, but you have the right to do it because that a portion of the cost. Choose either option, yet remember that running through a negative fuel filter will at some point lead come clogged fuel injectors at best. In ~ worst, it may cause a destroyed fuel pump and also fuel system.
Materials NeededNew fuel filter10, 14, and 17 mm flare seed wrenchesFluid capture panShop rags
Perform this project in a well-ventilated area due to the fact that the gas fumes might be harmful.
Step 1 – Disconnect battery and relieve the fuel device pressure
Disconnect the an adverse (black) terminal native the battery. Then, remove the gas cap to relax gas press from the fuel system.
Pro TipsTo relieve the fuel device pressure, friend can also loosen the gas push bolt at the finish of the fuel rail. If you use the bolt method, make sure that girlfriend re-tighten it when the task is finished.If friend don"t relieve the pressure prior to starting, it will certainly be more an overwhelming to eliminate or unplug all the important parts.
Step 2 – find the fuel filter
The fuel filter location is different on certain model years.1990-1994: Accord fuel filters are situated on the passenger"s next firewall.1995-2002: Accord fuel filter are situated on the behind of the engine, near the brake understand cylinder.
Step 3 – remove the reduced fuel line and also the upper fuel heat Banjo bolt
Once you have located the fuel filter, usage the 14 mm wrench and rotate counterclockwise to loosen the seed from the lower fuel line. Place the fluid record pan under this area to catch any type of spilled gas. As soon as the seed is removed, traction the lower fuel line turn off and collection it aside. Then, usage the 17 mm flare seed wrench to loosen the Banjo bolt on upper fuel line. Revolve the wrench counterclockwise to ease the bolt, and also then remove the fuel line by hand.Figure 3. Eliminate 14 mm bolt indigenous the bottom fuel line.
Step 4 – remove the clamp bolts
Using the 10 mm flare seed wrench, unfasten 2 bolts native the clamp that host the fuel filter in place.Figure 5. Eliminate two 10 mm bolts native fuel filter clamp.
Step 5 – change the fuel filter and reattach the clamp
Unclip the alignment feet holding the height of the fuel filter in place, and then eliminate the fuel filter native the clamp. Dispose the the old filter and place the new fuel filter in the clamp. Then, insert the fuel filter clamp to its original location and secure it with the 2 10 mm bolts.Figure 6. Remove and also replace the fuel filter indigenous the clamp.
Step 6 – Reconnect the upper and lower fuel lines
Before reconnecting the upper fuel line, insert two brand-new washers. Then, tighten the 17 mm Banjo bolt come a snug fit. Reconnect the lower fuel line, and secure it through the the 14 mm bolt to a snug fit together well.Figure 7. Re-attach the bottom fuel line.
Your instead of filter may have come through replacement washers. If not, you have to replace the washers that the upper fuel line as soon as you change the filter.
Step 7 – Re-check the fuel lines and bolts
Double check that your fuel lines and bolts are effectively secure.
Here are the bolts and also corresponding fuel lines:One 14 mm bolt because that the bottom fuel lineOne 17 mm Banjo bolt for the upper fuel lineTwo 10 mm bolts for the fuel filter bracket
Step 8 – test the new fuel filter
Tighten the gas lid (or gas pressure bolt in ~ the end of the fuel rail), and also reconnect the negative (black) battery terminal. Turn the ignition to the "ON" position 4 times (without starting the engine). This is to element the brand-new fuel filter v gas. Rotate the engine on because that the 5th turn. With the automobile running, check the brand-new fuel filter for any type of leaks. If you see any type of leaks, turn off the engine and re-tighten the fuel lines.
See more: Skyrim How To Change Your Name From 'Prisoner' To Whatever You Want?