Your Ford Windstar‘s brake irradiate indicator is there to allow you recognize that there is an problem with the brake system. It is various than the anti-lock brake system, which gets its very own ABS warning light. The brake light suggests that there is a trouble with the physics braking system itself.

You are watching: Ford windstar brake light stays on

If friend are analysis this write-up trying to figure out whether you have to drive your vehicle, inspect the emergency brake first. If it’s engaged, the brake irradiate will remain lit. If the take care of isn’t all of the way down, it’ll cause the brake warning light to continue to be on. Check to make certain that over there isn’t the tiny bit left that it needs to rotate the brake irradiate off.

Now if the emergency brake didn’t solve the situation, it’s time come look right into what is bring about your Windstar’s brake warning irradiate to remain on. The brake irradiate is perhaps the most crucial warning light of all. We execute not recommend driving with this irradiate on in ~ all. Doing therefore may lead to injury as soon as the brakes fail.

*

Ford Windstar Brake Warning light Causes

The brake warning light shows that her Windstar has detected that among its major brake contents has failed, commonly detected through a lose of pressure. You’ll feeling a loss of push that manifests itself in the type of a “mushy” brake pedal.

If the brake irradiate is just coming on as soon as you press the brakes, that’s a definite indication the the press in the brake system is also low. One of two people the brakes require bled, or over there is a leak.

Brake fluid Leak

Since you’ve already checked the emergency brake handle, now it’s time to inspect the master cylinder and see if the brake fluid is low or not. Currently if it is low, but not empty, adding an ext may administer a temporary fix.

If the brake fluid looks choose it is all the method out, you’ll need to add more, bleed the brakes, and ideally fix the difficulty so the you aren’t repeating every one of this again. If the brake fluid is leaking the end over the brake pads and shoes, it way poor brake performance.

Just remember, it had actually to leak out somewhere, and also that adding fluid without resolving the trouble is simply a short-term solution. The leak can acquire worse end time and lead come brake failure.

*

Pressure Differential Switch

Your brake mechanism is divided into 2 circuits. This circuits cut the brake mechanism in two. That way, if the brake system gets a leak or fails, you still have actually brakes on half of your Windstar’s wheels.

The pressure differential switch procedures the difference in pressure between the two circuits and will report the there is a difference by transforming on your Windstar’s brake warning light. In most vehicles this move is located in the grasp cylinder. You’ll watch a harness plugin somewhere around there.

Check the Brake Lights

Some vehicles will now activate the brake warning light on the dash if the actual brake lamp behind it go bad. Inspect to see that both that them room lighting up. If not, shot replacing the bulb and see if the solves the problem.

How to revolve off your Windstar’s Brake Light

The only way to turn the brake light turn off is to restore appropriate line press to both brake circuits when the pedal is pushed. If her Windstar is having actually trouble stopping, or remarkable leaking fluid, don’t journey it. Just have it towed come a mechanic. If you chaos up solving your engine, the car does no move. If you mess up resolving the brakes, that doesn’t stop. That’s infinitely more dangerous.

See more: Love Loyalty Friendship In Irish Gaelic Claddagh Wedding Ring

Conclusion

If her Ford Windstar’s brake warning light is on, and you’ve confirm the emergency brake, you’ll should look because that a leak in the lines, calipers, wheel cylinders, grasp cylinder, etc. Great luck diagnosing the issue. If there is anything that you would choose to add, please leave a comment below.