There space many types of loose materials the are offered in cubic yards, or “yards,” because that short. Topsoil, mulch, and gravel are just a few of the commonly used commodities that are sold by this volume metric.

You are watching: How many yards does a tandem dump truck hold

It isn’t just landscapers and also contractors who need to have knowledge of cubic yards. If you’re going come transport any kind of of the products mentioned above in a dump truck, for example, it’s crucial to know exactly how lot the truck have the right to carry. In the complying with guide, we’ll talk about how you recognize a intake truck’s capacity in cubic yards.

## Dump van Cubic Yardage - The Basics

While over there is room for variance, most full-size dump trucks have actually a capacity of in between 10 and 16 cubic yards. These varieties of vehicles often have their capacity listed in the owner’s manual.

Smaller intake trucks, frequently those an installed on a pickup frame, will have actually comparably much less capacity, sometimes as tiny as 1 ½ cubic yards.

If you can’t find your dump truck’s capacity in the owner’s manual, don’t worry. It’s relatively simple to identify using a ice cream measure and also a calculator.

Measure the width the the van bed, native the within of one wall to the other. Create down this number in feet to make the calculations simpler. For this reason let’s say her truck bed is 63 customs wide, you would write it under as 5.25 feet.Measure the length of the bed in the very same fashion and record the figure in feet.Measure the height of the bed, starting from the bottom and extending come the top of the tailgate or the sides (whichever is lower).At this point, you should have three figures detailed for the width, length, and also height of her bed. Multiply them all together to determine the capacity. For a van bed that’s 14 feet long, 6 feet wide, and 5 feet high, you would certainly calculate 14 x 6 x 5 = 420. This number is the capacity of her truck bed in cubic feet.There are 27 cubic feet in a cubic yard, so to discover your cubic yardage, you should divide the vault number by 27. Using the example above for our 420 cubic foot truck, we would certainly calculate 420 ÷ 27 = 15.56 cubic yards.

## Dump Truck volume - much more Than just Yardage

A cubic yard represents a block of material that measures three feet on every side. In theory, the material itself deserve to be anything, native water to stone to mulch. Because that this reason, yardage alone is one imperfect measure of a intake truck’s overall capacity. Perhaps more important is the truck’s weight rating.

The load rating will count on a range of factors, including the truck’s chassis and also suspension. Smaller dump trucks on pickup frames can have a load limit as low as half a ton, whereas larger dump trucks can lug as much as 15 tons (30,000 pounds) that material. That’s quite the vast range!

When hauling most materials, the load of your load will be the limiting factor. For example, sand deserve to weigh upwards that 3,000 pounds per cubic yard, definition that in a massive, 30,000-pound dump truck, girlfriend could bring a preferably of 10 cubic yards. In a dump van on a half-ton pickup frame, you might only lug a third of a garden of sand.

Mulch, in particular, have the right to be an overwhelming to account for, largely because it counts on how wet that is. Dried mulch can weigh as little as 700 pounds per yard, conversely, wet, compost-like mulch can tip the scale at 1,500 pounds every yard.

See more: How To Get Glue Out Of Hair, How To Actually Get Glue Out Of Hair

## Summary

Larger recording trucks can carry approximately 10 come 16 cubic yards that material. However, the complete volume is not generally the limiting factor. In many cases, the vehicle’s weight limit will determine just how much material you are at some point able to safely transport.