The surname of parts of buttonhole foot "A", which is provided for sewing buttonholes, are suggested below.

You are watching: How to make a buttonhole with a brother sewing machine

*

1.Use chalk to mark the position and also length that the buttonhole top top the fabric.

*

2. Pull the end the switch guide plate of buttonhole foot "A", and also then insert the button that will certainly be put through the buttonhole.

*

If the button does not fit in the button guide plate, add together the diameter and also thickness the the button, and then set the button guide plate to the calculated length. (The distance in between the markings on the presser foot scale is 5 mm (3/16 inch).)

*

Example: for a switch with a diameter of 15mm (9/16 inch) and also a thickness that 10mm (3/8 inch), the button guide plate must be set to 25 mm (1 inch) on the scale.

*

3. Connect buttonhole foot A.

4. Select a buttonhole stitch.

5. Pass the top thread down with the feet in the presser foot.

*

6. Place the cloth with the front finish of the buttonhole note aligned v the red clues on the next of the buttonhole foot, and also then reduced the presser foot lever.

*


CAUTION

Do not lower the needle into the fabric when aligning the marks. Preferred results might not be achieved.

When lowering the presser foot, carry out not press in the former of the presser foot, otherwise the buttonhole will not it is in sewn v the exactly size.

*


7. Pull down the buttonhole lever as much as possible.

*

- The buttonhole bar is positioned behind the clip on the buttonhole foot.

*

8. Gently hold the finish of the upper thread in her left hand, and also then start sewing.

*

If special seams are being sewn and also the towel does not feed, sew through the coarser (longer) stitch.

- once sewing is completed, the machine automatically sews reinforcement stitches, climate stops.

9. Raise the needle and the presser foot lever, remove the fabric, and also cut the thread.

10. Raise the buttonhole lever to its original position.

11. Insert a pin at the finish of the buttonhole stitching to protect against the stitching from being cut, and also then use a seam ripper to cut towards the pin and also open the buttonhole.

See more: Savage/Springfield/ Stevens Model 15A 22 Rifle Parts For Sale

*


CAUTION

When opened the buttonhole v a seam ripper, perform not place our hand in the cutting path. Otherwise, this may result in injury if the seam ripper to be to slip. Perform not use a seam ripper in any type of other means than just how it intended.