How carry out you take turn off the tight tape from your skateboard? discover a quick and also easy an approach to peel it turn off the deck.

You are watching: How to remove old grip tape

When it gets dirty, slippery, no functional, and beyond repair, friend might take into consideration removing her old grip tape and also replacing it with a new sheet.

So, why don"t you just rip it off? since it isn"t the simple. Grip tape is glued to the board"s deck, and it"s just not a an easy sticker.

There are several approaches for acquisition it off flawlessly there is no leaving residues, however the many efficient and also popular an approach requires just a couple of tools.

Here"s what you"ll have to remove her worn down grip tape:

1. A razor tongue or Swiss knife;

2. A hairdryer;

*

DIY Removing fixed Tape native Skateboarding

There"s no need for you to pay because that this type of organization when you can do it for you yourself in a few minutes.

The an initial thing the you have to do is take the trucks off her skateboard.

Once you"ve removed all hardware from her skateboard deck, it"s time to start peeling that old tight tape off.

All you need to do is grab among the skateboard"s ends, and also heat the edge v a hairdryer to loosen the adhesive.

Immediately after, acquire the razor blade slightly underneath the fixed tape in ~ a 45-degree angle to unglue a small section of it.

Go about the perimeter that the deck.

The score is to avoid it indigenous tearing or snagging as you begin to pull it off.

Do not force the blade too much. Otherwise, you"ll reduced right into the grip tape.

Once you"re may be to get your finger, slowly pull it turn off to make certain you deserve to peel it turn off in one piece.

If the starts to break turn off here and also there and also rip into sections, it"ll be harder.

Also, if you peel turn off a chunk of grit and also resin, you"ll probably be left through the PVC movie sheet that holds the entire grip tape together on the board.

If the happens, it"ll it is in harder to obtain it all off. So, it is in patient and take her time.

Once you grab a generosity chunk of grip tape, then you can speed up the whole process.

Sometimes, you"ll feel the the grip tape is yes, really glued to the deck, making that harder to remove it utilizing your hands.

That"s once the hairdryer comes into play. The warmth will melt the glue and allow you to pull the grip tape quicker and an ext efficiently.

If you can, usage one hand to punch the hairdryer right into the deck and also the other one to slowly pull the sheet.

If you"re struggling to organize both the board and hairdryer, try sitting perpendicular to the deck come gain control over it.

You"ll notice that, in many cases, the deck will reappear clean and practically new.


Tips and also Suggestions

The work could take more or less time to complete depending on exactly how sticky the old fixed tape is.

If you"re patient and also remove it tiny by tiny and pull closer to it, friend might have the ability to pull the entirety grip take it in one swift.

The hairdryer renders it simpler to eliminate the fixed tape from your skateboard. Actually, you might do that in less than five minutes.

Oftentimes, the hardest part is close to the skateboard"s truck holes. Sometimes, the grip tape deserve to snag and start come tear.

In the end, remove the excess grip tape and scrape away elevated edges that wood v the razor blade before using a brand-new sheet.

If you don"t have actually a razor tongue - or are too young or fear to usage it - you have the right to simply heat your old tight tape until your finger can conveniently pull that off.

See more: What Is The Repeat Unit In Starch Consists Of Repeating Units Of:

Finally, make certain it"s hardly any old glue before installing her fresh, brand new silicon carbide sheet.